TLEE Bearing Machine Development Co., Ltd
  • Address305 Courtneypark Drive West, Mississauga,Ontario, L5W 1Y4, Canada
  • Phone(Working Time)1-220-946-2173

Timken Bearings

Contact Now

Timken Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft. Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly. Spherical bearings and spherical rod ends are used on articulating joints and when the bearing must accommodate for axial misalignment.


The term "bearing" is derived from the verb "to bear"a bearing being a machine element that allows one part to bear another. The simplest bearings are bearing surfaces, cut or formed into a part, with varying degrees of control over the form, size, roughness and location of the surface. Other bearings are separate devices installed into a machine or machine part. The most sophisticated bearings for the most demanding applications are very precise devices; their manufacture requires some of the highest standards of current technology.


Timken 87762/87111B tapered roller bearings

57 56.5
62 11000

Timken RAXZ 512 complex bearings

6000 40
0.474 0

Timken SMN107KS deep groove ball bearings

13.9 mm 300 mm
140 mm 7.5 mm

Timken X32215/YSB32215R tapered roller bearings

670 rpm 136 mm
Tapered Bore Symmetric

Timken 77364/77675 tapered roller bearings

190 mm 0.075 to 0.125 mm
2.1 mm Open

Timken 1011KL deep groove ball bearings

2 mm 2.87
Tapered Bore 2.80

Timken K.81110LPB thrust roller bearings

186000 0
97 2

Timken E45KRRB deep groove ball bearings

14,500 N 50 mm
16.1 68 mm

Timken 311K deep groove ball bearings

60.096 kN 6020  
24 mm 2.205 kN

Timken HM535349/HM535310-B tapered roller bearings

6 1,330,000 N
Pressed Steel 0.170 to 0.220 mm

Timken XLS76K2 deep groove ball bearings

Machined Brass Symmetric
670 mm 360 rpm